Engine Rebuild Kits Camshaft Valve Lifters Springs Kit For Chevy LS LS1 LS3 Sloppy Stage 2 Cam .585″

1999-2012 Trucks/SUVs 4.8L V-8 VIN-V,C,A
1999-2007 Trucks/SUVs 5.3L V-8 VIN-T,Z,B
1997-2004 5.7L LS1 V-8
2001-2005 5.7L LS6 V-8
1999-2010 Trucks/SUVs 6.0L V-8 VIN-U,K
2005-2009 6.0L LS2 V-8
2008-2013 6.2L LS3 V-8; without AFM
2006-2013 7.0L LS7 V-8
Also fit Factory Roller 93-97 LT1, and 305-350 Chevy Engines.

E-1840-P Engine Camshaft for GM Chevy
Elgin Industries E-1840-P

• Use w/ 3-bolt cam gear
• Not for use w/ Active Fuel Management
• Cam Lift Intake: .344
• Cam Lift Exhaust: .344
• Valve Lift Intake: .585
• Valve Lift Exhaust: .585
• Adv. Duration Intake: 283°
• Adv. Duration Exhaust: 286°
• Duration @ .050 Cam Lift Intake: 228°
• Duration @ .050 Cam Lift Exhaust: 230°
• Intake Opens at: 6° BTC
• Intake Closes at: 42° ABC
• Exhaust Opens at: 51° BBC
• Exhaust Closes at: -1° ATC
• Camshaft Overlap: 59°
• Lobe Separation: 112°
• Intake Centerline: 108°
• Operating Power Range: 2,200-5,400 rpm

16pcs PAC-1218 Drop-In Valve Springs

• LS1 OEM Ovate Beehive Valve Spring
• OD Large End: 1.290
• ID Large End: 0.885
• ID Small End: 0.650
• Install Height: 1.800
• Load at Installed Height: 130
• Spring Open Height: 1.200
• Spring Open Load: 318
• Recommended Valve Lift: 0.600
• Spring Rate (lbs/in): 313.000
• Mass (grams): 62.00
• Coil Bind (max): 1.140

Pushrods
7.400″ Chromoly One Piece Pushrods, 5/16″ diameter, and .080″ wal

12499225 Chevrolet Performance Hydraulic Roller Lifters Kit, Set/16 Aftermarket Products

• OEM Replacement Hydraulic Roller Lifters
• For GM LS III/IV engines
• 0.842″ OD
• Sold as a set